Basic Setting; Switching The Unit On And Off; Radio Selector Key; Selecting A Radio Station - Skoda Octavia Bolero Manual

6

Basic setting

Basic setting

Switching the unit on and off

– The system is switched on or off by pressing the rotary/push knob
for a long period of time.
The last active audio source before switching off is repeated.
If the key is pulled out of the ignition lock with the unit switched on, the unit wil
switch off automatically. You can then switch the unit on again. When the ignition is
switched off, the unit switches off automatically after approx. one hour (discharge
protection of the vehicle battery). This process can be repeated as often as
necessary.

Audio settings

By pressing the button you can select the following parameters:

•
- Setting of height, middle and depth;
Height-Middle-Depth
•
- Volume ratio (left and right = balance), (front and rear = fader);
Balance fader
•
- ,
Volume Switch on volume Traffic announcements
volume, traffic announcements and volume of park distance control signal;
•
- Speed dependent volume adaptation;
GALA
•
- Switching on or off the tone signal when storing the radio
Confirmation tone
stations.
Reducing the volume when activating the parking aid (PDC)*
If your vehicle is equipped with "parking aid", the volume is automatically
decreased to a pre-defined value, when the "parking aid" is active.
GALA function
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.

RADIO selector key

A

Selecting a radio station

1
Call up RADIO main menu and choose frequency range
– Press the range selector key
– To change the frequency range, press the function key
Changing radio station
– By pressing the arrow keys on the display of the RADIO main menu,
Selecting a radio station from the station list
– Press the function key
and * - Switch on
PDC
– Choose the desired station by pressing the respective selection. After
Function keys in the Radio main menu
1...
Band
Station list
Memory
RADIO
The currently heard radio station is indicated at the top of the display.
function key and on or
band FM
window. The current frequency range is indicated at the top left of the
display.
you can change to the previous or the following station.
Station list
currently be received. The list "skips" directly to the display of the
currently heard radio station.
about 20 seconds without operation the image of the station list will
close automatically.
to – Station keys for storing or calling up a stored radio station.
...42
– Button for selecting the desired frequency range.
– opens the list of the presently receivable radio station.
– opens the list of the stored radio station.
to call up the RADIO main menu.
or the
RADIO
in the opening pop-up
AM
to display all radio stations that can