Mackie HDR24 Quick Start Manual page 16

24 track/24 bit, digital audio hard disk recorder and editor

Hide thumbs Also See for HDR24:

Table of Contents

HDR 24/96

1. Select Setup from the Windows menu (or use keyboard

shortcut CTRL+1) and click on the Digital I/O icon.

The Digital I/O Setup dialog shows you the current settings

for each of the three I/O cards (see illustration below).

2. Click on the Input pulldown menu and select either

ADAT or TDIF for each DIO•8 card.

3. Click on the Output pulldown menu and select the

desired output format. Or, select the TDIF–>ADAT or

ADAT–>TDIF option to convert between formats,

bypassing the HDR24/96 tape signal path entirely.

4. Click the arrow in the top right corner of the dialog or hit ESC to exit.

I/O Card 1-8

(AIO•8)

24- bit Analog

The input and output settings on the DIO•8 card need not be the same.

For example, you can use outboard A/D converters with ADAT Optical

outputs and a console with TDIF inputs without problems. Just remember

to correctly set up Word Clock.

I/O Card 17-

I/O Card 9-16

24 (PDI•8)

(DIO•8)

Apogee DIO

AES-EBU

ADAT

Setup

ADAT

TDIF

TD -> AD

AD -> TD

Table of Contents

Hdr96