Titling (Cd Text) - Tascam CD-RW750 Owner's Manual

1
With the disc loaded, and the unit in stop
mode, press the
ERASE
2
Turn the
MULTI JOG
keys until the display shows
SKIP I
.
REFRESH
3
To refresh the disc, press the
trol or press the
ENTER
NOTE
This operation cannot be undone. If you are going to
refresh a disc, make sure that it contains only recordings
that you really want to erase!

Titling (CD TEXT)

The CD-RW750 allows you to add titles to discs and/
or tracks on the disc which can be read and displayed
by suitably-equipped players (naturally, the CD-
RW750 is itself such a player, capable of reading and
displaying CD TEXT—see "Simple playback opera-
tions" on page 15 and "Time display modes" on
page 15).
Up to 23 alphanumeric characters (including space)
may be written in a title. One title may be written per
disc and per track (for example, it is not possible to
enter the disc title and artist as separate titles).
NOTE
Titling can only be carried out on an unfinalized record-
able disc, and the titles only become readable by a
player after the disc has been finalized.
This is a menu option, accessed in the following way
(this describes the operation from the main unit—
you can also use the SKIP
unit rather than turning the
the key of the remote control unit rather than
ENTER
pressing the control).
MULTI JOG
1
Press the key until the display shows
MENU
. Press the
CD TEXT?
2
The display shows
T_EDIT DISC?
edit the disc title, press the
trol, or to start editing the track titles, turn the
control so that the display shows
.
T_EDIT>01
Tr
Continue turning the control to select the
track whose title will be edited, and press it
key ( or ).
G D
control or use the
B
DISC
con-
MULTI JOG
key .
7
keys of the remote control
MULTI JOG control, and
control.
MULTI JOG
. To
con-
MULTI JOG
5 – After recording
4
If you do not want to proceed with the refresh
operation, press any other key (such as the
key).
STOP
5
If the erase operation has been selected, the
word flashes on the display, and the
ERASE
timer starts counting down. The refresh oper-
ation typically takes around 40 minutes or so.
6
At the end of the countdown period, the word
appears briefly on the display,
Complete
and the display returns to the track/time
display (of course, there are no tracks, and the
disc is as the start, with the total time of the
disc available for recording).
when the number of the track whose title will
be edited is displayed.
3
Use the control both to enter char-
MULTI JOG
acters (uppercase and lowercase letters, num-
bers, and symbols) and to move the entry
cursor.
Change between these two cursor modes with
the
FADER (JOG MODE)
•
When the
MULTI JOG
the cursor is a flashing underline (changing
to data entry mode inserts a space at the
cursor). Turn the control to select the char-
acter, and push it to confirm the entry and
move to the next character position.
•
When the
MULTI JOG
movement, the cursor is a steadily-lit under-
line.
•
Use the
ERASE/DEL
at the cursor.
•
Change between uppercase and lowercase
letters using the
DISPLAY
case is selected,
CAPS
4
Press the
FINALIZE/YES
the title. The display shows
lowed by
Write OK
. From this step, you can then select
T_EDIT
another title to edit.
5
Press the key when all titles are finished.
STOP
6
Finalize the disc (see "Finalizing" on page 25).
TASCAM CD-RW750 Owner's Manual
key,
is used for data entry,
is used for cursor
key to delete characters
key. When upper-
is shown in the display.
key to finish editing
fol-
Writing
and returns to
27