Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Titles can be given to the disc and the tracks on the disc, using
the TEXT EDIT option on the TEXT sub-menu.
NOTE
After a new title is selected and entered on the disc,
TOC will light up on the display. If the power is turned
off, the TOC has not been recorded on the disc and
Title input operation
Follow the guidelines below to input titles on the screen.
Operate them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see
"Title input by keyboard" on page 36).
Select the type of character for input
DISPLAY
Press the
key on the unit or the remote control
to select from two different types of characters.
Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
MULTI JOG
Rotate the
dial or the
the remote control to get the desired characters on the
display.
MULTI JOG
Push the
dial or press the
the remote control to enter.
To move the cursor position
Use the
key and the
∆/˙
SEARCH
panel, or the
key on the remote control.
To delete characters
Place the cursor on the character, then press the
ERASE/DEL
key on the front panel, or the
on the remote control.
Disc title input
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see "Operation basic" on page
16).
will appear.
T e x t > D i s c
MULTI JOG
2. Press the
dial or the
the remote control.
Now, you can input or edit the disc title following
the guidelines above.
Track title input
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see "Operation basic" on page 16).
MULTI JOG
2. Rotate the
MENU (+/-)
keys on the remote control to select the
track number you wish to title.
MULTI JOG
3. Push the
dial or press the
on the remote control.
MENU (+/-)
keys on
ENTER
key on
key on the front
˚/¥
ERASE
key
MENU (+/-)
key on
dial or repeatedly press the
ENTER
key
the titles will not have be added. You must finalize
the disc to save the titles.
To insert characters
Move the cursor to the location where you wish to insert
a character, and press the
FINALIZE
front panel or the
To change a character
Place the cursor on the character to be changed, then
input the desired character.
NOTE
As with the TEXT menu, if you attempt to eject the
disc without writing the TOC to the disc, the display
will show
. If you want to eject the disc
S u r e ? T e x t !
without performing a TOC write, press the OPEN/
CLOSE key while "Sure Text!" is shown on the display.
The text that have been edited or entered will be
abandoned.
The disc or track title on a finalized disc cannot be
edited. Unfinalizing (CD-RW only) is needed in this
case to use the title input function.
MENU
3. Press the
key to enter.
If you want to cancel, press the
Now, you can input or edit the track title following
the guidelines above.
MENU
4. Press the
key to enter.
If you want to cancel, press the
TASCAM CD-RW901MKII
7 − Titling
FINALIZE/INS
key on the
key on the remote control.
STOP
key.
STOP
key.
35
Advertisement
Table of Contents
