Power Source - Whistler HIGH SURGE POWER INVERTERS Owner's Manual

and typically is referenced on the back of the microwave. If
the operating power requirement does not appear on the
back of the microwave, check the owner's manual or contact
the manufacturer.
Some Powerful Advice.
Your Whistler inverter will work best when placed on a reasonably
flat surface. The floor or wall of your vehicle are good locations.
When driving with the inverter in operation, make certain that
neither the inverter nor the power cords will impede safe
operation of your vehicle. Keep the unit and all cords clear
of the steering wheel, gas, brake and clutch pedals and gear shift.
To maintain your inverter in proper working condition, note
the following important safety precautions:
• MOISTURE. Keep the inverter dry. Do not expose it
to moisture. Do not operate the inverter if you, the
inverter, the device being operated or any other surfaces
that may come in contact with any power sources are
wet. Water and many other liquids can conduct
electricity which may lead to serious injury or death.
• HEAT. For peak efficiency, the ambient air
temperature should be between 50° and 80° F. Avoid
placing the inverter on or near heating vents,
OPERATION
21