ZyXEL Communications P-2812HNU-51c Quick Start Manual page 9

There is no wireless security enabled on the P-2812HNU-51c by default.
If you do not set wireless security, anyone within transmission range
could use your P-2812HNU-51c to access your network and the Internet.
See the User's Guide for how to configure wireless security settings.
Setting Up a Wireless Network with WPS
If your wireless devices display the WPS logo, you
can use Wi-Fi Protected Setup (WPS) to add
wireless devices to your wireless network. If your
wireless devices do not display the WPS logo, go to
Set Up a Wireless Network Manually
wireless network.
The P-2812HNU-51c supports two WPS methods for creating a secure
connection.
• Push Button Configuration - create a secure wireless network
simply by pressing the P-2812HNU-51c's physical WPS button.
See Push Button Configuration
• PIN Configuration - create a secure wireless network by entering
your wireless device's PIN (Personal Identification Number) into the
configuration screen of the P-2812HNU-51c. See
on page 10.
You must use the same method on the P-2812HNU-51c and the wireless
client.
Push Button Configuration
1. Place a WPS-enabled device that is installed in your system and
supports the WPS Push Button method within range of the P-
2812HNU-51c.
on page 11 to manually set up a
on page 9.
PIN Configuration
9