Palm Pre User Manual page 293

Accept a Pairing Request From Another Device
Note
1. Open Bluetooth
2. Make sure Bluetooth is on (see "Turn the Bluetooth Feature On/Off" on page 291).
3. Initiate a pairing from the other device.
4. When the connection request appears, tap Yes, allow.
5. If a passkey is not required, pairing is complete when the Devices list appears. If a
passkey screen appears, do one of the following:
An automatically generated passkey appears on the passkey screen: Check the
other device screen to verify that the passkey is correct, and tap Yes, connect to
connect.
The screen displays a passkey generated by your phone: Enter the displayed
passkey on the other device.
The screen prompts you to enter a passkey: Check the documentation that came
with the other device to see if there's a required passkey. (If so, enter that passkey on
your phone. If not, make up a passkey and enter it on both devices.)
Connect With a Paired Device
After you pair with a device, you can connect to that device without having to go through the
pairing process again.
Note
Section 3C: Your Connections to the Web and Wireless Devices
Your phone is only discoverable when the Bluetooth app is open, the app
window is maximized, and Bluetooth is turned on. If you move away from
the Bluetooth app, minimize the app to a card, or turn off the screen, your
phone is no longer discoverable.
.
To connect with a paired computer, you must initiate the connection from
the computer. See the computer documentation for instructions.
293