Table of Contents
Advertisement
Modero X® Series Touch Panels
Picture View Send Command
The ^PIC Send Command stops either mode of Picture View, or starts Preview Mode. For more information,
please refer to the Modero X Series Programming Guide, available at www.amx.com.
All images must be in JPEG format. PNG and other image formats cannot be viewed
through Picture View.
Configuration
The MXT-1000 and MXD-1000 are equipped with Settings Pages that allow you to set and configure various
features on the panels. For more information on connecting and configuring the touch panels to a network,
please refer to the Modero X Series Programming Guide, available at www.amx.com.
Bluetooth Support
Both the MXT-1000 and the MXD-1000 allow the use of Bluetooth keyboard and mouse combinations, using
HID Profile v1.1. Using a keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB
Adaptor (FG5968-19).
NFC
Both the MXT-1000 and the MXD-1000 support Near Field Communications™ (NFC) Technology. NFC
technology facilitates making transactions, exchanging digital content, and connecting electronic devices with
a touch. NFC transmissions are short-range (from a touch to a few centimeters), working with existing
contactless card technologies and containing built-in capabilities to support secure applications. By using NFC
technology, users may receive access to touch panels and touch panel pages through access badges and other
card options.
Common Access Card (CAC) Support In MXT/D-1000
Card Type
15693
14443A Non-Gov't
14443A Gov't
14443B Non-Gov't
14443B Gov't
FeliCa
(1) The UID can be a fixed unique number or a random number dynamically generated by the card.
(2) Requires contact card reader (not accessible via NFC)
The maximum range for the NFC antenna is 0.5" (12.7 mm), but the typical usage range is 0.25" (6.35 mm).
The antenna itself is accessible from the front of the panel, 3.25" (82.55 mm) from the left corner of the panel
and 0.375" (9.53 mm) from the top edge. When using an NFC device with the MXT-1000, you should align
your device's antenna with the center of the touch panel's antenna (FIG. 1 and FIG. 4).
To facilitate NFC antenna access, you may want to add an icon to the panel's
page(s), pointing to the location of the antenna on the panel.
Cleaning the Touch Overlay and Case
Both the MXT-1000 and the MXD-1000 come with the MXA-CLK Modero X Series Cleaning Kit (FG5968-
16), which may be used to clean fingerprints and dirt from the device. This kit comes with cleaning cloths and
a bottle of cleaning fluid specifically for use with the device.
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and
then apply the cloth to the touch screen. Do NOT use abrasives of any type to clean the device, as abrasives
may permanently damage or remove the device's finish.
12
Card Unique
Identifier (UID)
8 byte UID
Not Supported
4, 7 or 10 byte UID (1)
Not Supported
4, 7 or 10 byte UID (1)
Not Supported (2)
4 byte UID
Not Supported
4 byte UID
Not Supported (2)
Not Supported
Not Supported
MXD/T-1000 10.1" Modero® X Series Touch Panels
Card Data
Personal Identity
Verification (PIV)
Card holder UID
N/A
N/A
Not currently
N/A
Not currently
N/A
Hide quick links:
Advertisement
Table of Contents
