Volume - Miele HG05 Operating Instructions Manual

Settings menu

Volume

A sequence of audible tones will sound
at the end of the programme or if there
is a fault as long as the buzzer has
been activated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound 4 times at intervals with a short
pause between each set of tones.
The buzzer which sounds when there
is fault cannot be deactivated.
Buzzer at the end of a programme
The buzzer at the end of a programme
will sound 4 times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of
the programme can be selected in sev‐
en stages or switched off.
 Select the volume you want using the
and
Quieter Louder
the buzzer off.
 Confirm with
OK
Night time buzzer tone
You can select a different volume for
the buzzer at night, or switch it off.
 Select the volume you want for the
night time buzzer using the
and sensors, or switch the
Louder
night time buzzer off.
 Confirm with
OK
92
sensors, or switch
.
Quieter
.
Night time
You can select the times for night time
to begin and end.
 Select the
Start at
 Use the arrow sensors  to set the
time in hours and minutes for the
night time to begin and confirm both
with .
OK
 Select the
Finish at
 Use the arrow sensors  to set the
time in hours and minutes for the
night time to end and confirm both
with OK.
Keypad tone
An audible tone sounds each time a
sensor is pressed.
The volume for the keypad tone can be
set in seven stages, or switched off.
 Select the volume you want using the
and
Quieter Louder
the keypad tone off.
 Confirm with
OK
option.
option.
sensors, or switch
.