Before using for the first time
Basic settings
Open the door.
Switch the dishwasher on using the
sensor.
The welcome screen will appear when
the dishwasher is switched on for the
first time.
Language
The display will then change automati‐
cally to the screen for setting the lan‐
guage.
Use the arrows to select the lan‐
guage you want and also the country,
if appropriate, and confirm your se‐
lection with
OK
See "Display / Settings menu" for
more information about the display
and controls.
A tick will appear next to the lan‐
guage that has been set.
22
.
Time
The display will then change to the
screen for setting the time.
The time of day needs to be set before
the
programme option can
Delay start
be used.
You can also show the current time of
day in the display.
Use the arrow sensors to set the
hour and confirm with
Then set the minutes and confirm
with
.
OK
Keeping the relevant sensor pressed
in, will increase or decrease the time
automatically.
.
OK