Miele HG05 Operating Instructions Manual page 53

EcoStart
The function allows you to take
EcoStart
advantage of time variable economy
rates of electricity. Before you can use
this option you must set up to three
electricity tariff time zones (see "Set‐
tings menu, EcoStart").
You then set the latest time at which the
programme selected should end.
The dishwasher will start automatically
in the cheapest tariff zone within the
time set.
 Use the arrow sensors  to set the
hour and confirm with
The hours will be saved and the minute
number block will be highlighted.
 Use the  arrow buttons to set the
minutes and confirm with
The display will change to show the
programme menu.
 Close the door.
The left hand in-operation indicator light
will start flashing on and off.
The estimated start time for the pro‐
gramme selected will appear in the dis‐
play.
The selected programme will start auto‐
matically during the most cost effective
time zone. It will finish at the latest by
the set finish time.
.
OK
.
OK
Programme options
Changing or deleting set times
You can change the set times or the
programme before the start time in the
display is reached.
 Open the door.
 Select the
Change
with .
OK
 Press the  button.
 Select the function that you want to
change or delete the time for.
After confirming the
can change the set time.
After confirming the
set time will be deleted and the  indi‐
cator light will go out.
You can now select and start a pro‐
gramme.
option and confirm
option you
Change
option the
Delete
53