Connecting The Printer Interface; Cable Communications; Wireless Communication With Bluetooth - AMT Datasouth Fastmark M4 Series User Manual

Connecting the printer interface

The printer must establish communication with a host terminal which sends the
data to be printed. There are three ways to connect for Fastmark M4 series
printer.
 By a USB cable between the printer and its host terminal
 By a Bluetooth short-range radio
 By a Wireless LAN per 802.1 b/g (Optional)

Cable communications

USB connector (Printer)
1.
Open the interface cover and connect the printer to the computer/smart
phone (host terminal) with USB cable. (USB to USB or USB to RS-232)

Wireless communication with Bluetooth

1.
Turn on the printer.
2.
Open the Bluetooth device for host terminal to scan for printer's
Bluetooth device
3.
Connect the Bluetooth devices. The Bluetooth LED will turn on blue (the
Bluetooth icon will be shown for LCD panel) if devices have been paired.
Printer Bluetooth default
Address
Name
PIN
USB/RS-232 connector (PC)
You can find the printer address by printing the configuration
(self-test) page.
BT-SPP (Use DiagTool to change NAME)
0000 (Use DiagTool to change PIN)
~ 25 ~