Deck; Dimensions; Torque Requirements; Assembly Instructions - Exmark Viking Hydro Operator's Manual

2.9.2 Discharge: Right Side
2.9.3 Blade Size:
Model 32 in.................... 16.25 in. (41.3 cm)............... Qty. 2
Model 36 in.................... 18.00 in. (45.7 cm)............... Qty. 2
Model 48 in.................... 16.25 in. (41.3 cm)............... Qty. 3
2.9.4 Type of Drive: Manual engagement of belt with over-center lock. Belt tension
is adjustable via turnbuckle.
2.9.5 Blade Brake: When the PTO engagement control is move to the disengaged
position a friction brake pad stops the rotation of the blades.
2.9.6 Deck Mounting: Bolted directly to the engine deck.
2.9.7 Cutting Height: Adjusts in 1/4" (.63 cm) increments from 1" (2.5 cm) to 4 1/4"
(10.8 cm).

2.10 DIMENSIONS

2.10.1 Overall Width:
Discharge chute down
Discharge chute up
2.10.2 Overall Length:
2.10.3 Curb Weight:
2.10.4 Overall Height: 43.2"(109.7 cm)(all units)
2.10.5 Tread Width (to outside of tires):
32" Model.................... 32.0" (81.4 cm)
36" Model.................... 35.6" (90.4 cm)
48" Model.................... 39.6" (100.6 cm

2.11 TORQUE REQUIREMENTS

BOLT LOCATION
Blade/Cutter Housing Spindle Bolt ................................. 75-85 ft-lbs. (102-115 N-m)
Caster Bracket Mounts ................................................... 30-35 ft-lbs. (41-47 N-m)
Cutter Deck/Engine Deck Mount .................................... 30-35 ft-lbs. (41-47 N-m)
Engine Mounting Bolts
Kohler ................................................................ 25-30 ft-lbs. (34-41 N-m)
Kawasaki ........................................................... 15-20 ft-lbs. (20-27 N-m)

3. ASSEMBLY INSTRUCTIONS

3.1 Uncrate unit, remove upper handle assembly, casters, fuel tank, and linkages
from top of crate.
3.2 Place a length of 4" x 4" (10 x 10 cm) block between the front of the cutter deck
and the pallet.
3.3 Remove the bolt bag from the top of the fuel tank support.
3.4 Loosen the 5/16" hardware at the two (2) discharge chute hinge points so that
the chute is snug, but can be moved up and down freely.
3.5 Refer to Parts Manual to help you identify and locate parts and their proper position.
3.6 Install casters to front of deck using appropriate hardware from the bolt bag
(eight 3/8 x 3/4" bolts and eight 3/8" whizlock nuts); tightening the lower four bolts
first, then the top four.
(Transport only)
Overall Length
Curb Weight
32" 36"
43.3" 47.0
(110.0 cm) (119.4 cm)
32.7" 36.4"
(83.1 cm) (92.5 cm)
32" 36"
77.3" 77.3"
(196.3 cm) (196.3 cm)
32" 36"
487 lbs. 498 lbs.
(221 kg) (226 kg)
TORQUE
- 10 -
48"
57.9"
(147.1 cm)
48.1"
(122.2 cm)
48"
72.3"
(183.6 cm)
48"
551 lbs.
(250 kg)