Replacing Seat Support Bracket T-Nuts - Invacare Arrow RWD Service Manual

SECTION 7
7. Adjust seat mount plates to desired
angle. Refer to SEAT ANGLE
ADJUSTMENT in SECTION 6 of
this manual.
8. Reverse STEP 2.
9. Perform the instructions
outlined in PREPARATION
FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD
FRAME, ASBA, AND VAN
SEAT) in SECTION 6 of this
manual.
REPLACING SEAT SUPPORT BRACKET T-NUTS (FIGURE 3)
1. Perform the instructions outlined in PREPARATION FOR REMOVING/
INSTALLING SEAT FRAME (STANDARD FRAME, ASBA, AND VAN SEAT) in
SECTION 6 of this manual.
2. Perform one (1) of the following:
A. Remove standard seat frame subassembly. Refer to REMOVING/INSTALLING
STANDARD SEAT FRAME SUBASSEMBLY in SECTION 6 of this manual.
B. Remove ASBA subassembly. Refer to INSTALLING/REMOVING ASBA ASSEM-
BLY AND OR COMPONENT
REPLACEMENT in SECTION 6 of this manual.
C. Remove van seat. Refer to
INSTALLING/REMOVING VAN
SEAT ASSEMBLY in SECTION 6
of this manual.
3. Remove the seat mount plates.
Refer to REPLACING SEAT
MOUNTING PLATES in this
section of the manual.
3G Storm Series Wheelchairs
®
Washer
Base
Frame
FIGURE 2 - REPLACING SEAT SUPPORT
BRACKETS
Base
Frame
FIGURE 3 - REPLACING SEAT
SUPPORT BRACKET T-NUTS
48
BASE FRAME
Mounting Screws
Seat Support
Bracket
T-Nut
Seat
Support Bracket
Channel
Cover
End Cap
T-Nut
Part No. 1104849