Installing/Removing Van Seat Assembly; Replacing Van Seat And/Or Van Seat Frame - Invacare Arrow RWD Service Manual

SECTION 6
INSTALLING/REMOVING
VAN SEAT ASSEMBLY
(FIGURE 7)
INSTALLING VAN SEAT
1. Position the van seat on the seat
mounting plates at the position shown
in FIGURE 7.
2. Line up mounting holes in the van seat
frame and the mounting holes in the
seat mounting plates.
3. Secure the van seat to the seat mount-
ing plates with four (4) mounting
screws, and locknuts. Torque to
156 in-lbs.
REMOVING VAN SEAT
1. Remove the four (4) mounting screws
and locknuts that secure the van seat
to the seat mounting plates.
2. Remove van seat from seat mounting plates.

REPLACING VAN SEAT AND/OR VAN SEAT FRAME

(FIGURE 8)
1. Perform the instructions outlined in
PREPARATION FOR REMOVING/
INSTALLING SEAT FRAME (STANDARD
FRAME, ADJUSTABLE FRAME, AND
VAN SEAT) in this section of the manual.
2. Remove the van seat assembly from
the wheelchair. Refer to
INSTALLING/REMOVING VAN
SEAT ASSEMBLY in this section
of the manual.
3. Remove the four (4) mounting
screws, two (2) washers, and
two (2) spacers that secure the
van seat to the seat frame.
3G Storm Series Wheelchairs
®
Mounting Screws
(Torque to
156 in-lbs)
Seat
Mounting
Plate
Locknuts
FIGURE 7 - REMOVING/
INSTALLING VAN SEAT
ASSEMBLY
Van Seat
Van Seat
Frame
Washer
Mounting Screw
(Torque to
75 in-lbs)
FIGURE 8 - REPLACING VAN SEAT
AND/OR VAN SEAT FRAME
40
SEAT FRAME
Van Seat
Seat
Mounting
Plate
Base
Frame
Spacer
Part No. 1104849