Accessing The Dvd Menu; Moving Through Chapters - Jensen VM9314 Operating Instructions Manual

VM9314
Fast Forward Playback
Press the button (14) on the remote control or the
to fast forward. Keep pressing and releasing the button to increase the rate
from "x2" to "x4", "x8", and "x20".
Press /|| (18) on the remote control or touch the on-screen play button ( ) to
resume normal play.
Repeat Playback
Press the RPT button (7) on the remote control or the
alter repeat mode according to the following:
• DVD: Repeat Chapter, Repeat TItle, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Press the A-B button on screen to set the start point (A) of the repeated
section.
• Press the A-B button again once you reach the desired end point (B) of
the repeated section. The selected portion of the DVD will now repeat
continuously.
• Press the A-B button again to cancel the A-B section setting and stop
repeat play.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD
menu. Use the directional (arrow) buttons on the remote control to select a title
from the menu or touch the title on screen.
Press the TITLE button (2) on the remote control or on screen to select a
different title for playback.
Press the /|| button (18) on the remote control or press the rotary encoder (1)
to confirm your selection and begin playback. You can also select a title using
the touch screen.

Moving Through Chapters

Press the | button (19) on the remote control or the
advance to the next chapter on the DVD.
35
button on the screen
button on screen to
| button on screen to