Direct Tuning; Using Preset Stations - Jensen VM9314 Operating Instructions Manual

Direct Tuning

To enter a radio station directly, touch the
(21) on the remote control to display the direct entry menu.
Enter the desired radio station using the on-screen number pad. Press the
arrow (enter) button to tune to the selected station. To exit the screen without
changing the station, touch Exit. To clear your entry and start over, touch
Clear.

Using Preset Stations

Eighteen numbered preset buttons store and recall stations for the AM and FM
band. All eighteen stored stations (P1-P18) for the current band appear on the
screen for immediate recall.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (24) on page 2/2 to open the preset
screen.
3. Touch to enter the preset number in which you would like to store the
current station (or touch Exit to cancel and close the menu). The preset
number and station appears highlighted in the list.
button or press the GOTO button
FM . MHz
1 2 3
Exit
6
4 5
9
7 8
0 C
Preset:P
1 2 3
Exit
6
4 5
8 9
7
0 C
30
VM9314