Panel Body And Frame; Tub Front (Front Bulkhead) - LG DLEX8388WM Training Manual

TRAINING MANUAL
FRAME BODY and PANEL FRAME

TUB FRONT (FRONT BULKHEAD)

DLEX8388WM
Remove the four screws that hold the
water assembly rail in place. There are two
screws on each end.
Remove the two screws on the front panel
frame.
Remove the two screws from the top of the
front panel frame.
Remove the panel frame from the front of
the dryer by lifting it slightly and
disengaging the tab on each end from the
slot in the dryer frame.
Remove the top plate.
Remove the front cabinet.
Disconnect the door lamp (top) and
electrode sensor (bottom).
Remove the four screws holding the front
assembly.
Lift the tub front up and away.
Page 53
DLEX8377WM
STEAM DRYER