Stacking Kit Installation - LG DLEX8388WM Training Manual

TRAINING MANUAL
WARNING! Do not attempt this alone! At least two people are required to lift the dryer
and place it properly on top of the washer. Failure to observe this warning could result in
serious physical injury and damage to the appliances.
DLEX8388WM
INSTALLATION
Place the washer on a solid, even floor. If
you plan to use a pedestal, install it now
before going any further.
Peel the protective paper from the
adhesive tape on the side bracket.
Fit the side bracket firmly to the top plate
using the adhesive tape, as shown in the
drawing.
Secure the bracket to the top plate using a
screw, as shown.
Repeat these steps for the other side.
Level the dryer on a firm solid floor and
lock down the adjusters before placing it
on top of the washer.
Lift the dryer on top of the washer it
toward the front of the washer, as shown.
Slide the dryer all the way back to the stop
on the rail.
Page 10
(Stacking Kit)
DLEX8377WM
STEAM DRYER