Vent Replacement (Side Venting Kit) - LG DLEX8388WM Training Manual

TRAINING MANUAL
VENT REPLACEMENT
DLEX8388WM
Use the VENT KIT to change the exhaust
direction. (Part # 383EEL9001B see
photo, page 58.)
On the back of the dryer, remove the screw
securing the exhaust duct.
(A) Remove the knockout on the left,
right*, or bottom, as necessary.
* Right vent option not available
on gas dryers due to internal
piping interference.
(B) Insert the replacement pipe.
(C) Attach the pipe with a screw.
Pre-assemble the elbow and a replacement
duct and secure the joint with duct tape.
Insert the pre-assembled elbow into the
dryer through the vent hole and connect it
to the internal pipe.
Tear off some pieces of duct tape and
secure that joint also.
Connect the pipe to the exhaust duct.
Page 56
DLEX8377WM
STEAM DRYER