Cisco RV180 Administration Manual page 18

Introduction
Mounting the Cisco RV180/RV180W
STEP 1
STEP 2
STEP 3
Cisco RV180/RV180W Administration Guide
To mount the firewall to the wall:
Determine where you want to mount the firewall. Verify that the surface is smooth,
flat, dry, and sturdy.
Drill two pilot holes into the surface 2-7/16 inches (61 mm) apart, and with a
minimum of 5. 1 2 inches (130 mm) of clearance.
Insert a screw into each hole, leaving a gap between the surface and the base of
the screw head of at least 0. 1 inches (3 mm).
2-7/16" (61 mm)
1
9