Configuring User Accounts - Cisco RV180 Administration Manual

Administering Your Cisco RV180/RV180W
Using the Management Interface
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco RV180/RV180W Administration Guide

Configuring User Accounts

The Cisco RV180/RV180W supports two user accounts for administering and
viewing settings: an administrative user (default user name: "cisco") and a "guest"
user (default user name: "guest"). The guest account has read-only access. You
can set and change the username and password for both the administrator and
guest accounts.
Configuring Password Aging
Choose Administration > Management Interface > User Accounts.
In the Password Aging section, check Enable to enable password aging. Password
aging requires the user to enter a new password after the password has expired.
Enter the password aging time. This is the number of days before the password
expires.
Click Save.
Configuring Usernames and Passwords
Choose Administration > Management Interface > User Accounts.
Click either Edit Admin Settings or Edit Guest Settings.
Enter the new username.
Enter the old password.
Enter the new password. It is recommended that passwords contains no
dictionary words from any language, and are a mix of letters (both uppercase and
lowercase), numbers, and symbols. The password can be up to 30 characters.
Click Save.
7
139