Cisco RV180 Administration Manual page 111

Configuring the Firewall
Firewall Configuration Examples
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco RV180/RV180W Administration Guide
• Web server PC in the DMZ, IP address: 192. 1 68. 1 .2
• Access to Web server: (simulated) public IP address 10. 1 .0.52
Parameter
Connection Type
Action
Service
Source IP
Start
Send to Local Server (DNAT IP)
Rule Status
Example 4: Block traffic by schedule if generated from specific range of
machines
In this example, you want to block all HTTP traffic on the weekends if the request
originates from a specific group of machines in the LAN having a known range of
IP addresses, and anyone coming in through the Network from the WAN (i.e. all
remote users).
Setup a schedule. Choose Firewall > Advanced Settings > Schedules.
Click Add.
Enter the schedule name (for example, "Weekend").
Under Time, check All Day.
Under Repeat, leave Everyday unchecked.
Check Saturday and Sunday.
Click Save.
Value
Inbound
Always Allow
HTTP
Single Address
10. 1 .0.52
192. 1 68. 1 .2 (local IP address of your web server)
Enabled
4
102