Assembly - Husqvarna FS 513 Operator's Manual

. Connect Water tank hose to blade guard water valve.
• Verify that blade guard water valve is in the OFF posi-
tion.
• The water tank hose is now assembled to the saw.
Filling Water Tank:
8. Remove the cap by turning counter clockwise. See
diagram at right.
• Fill water tank only with water. Read all WARNINGS
before using water tank.
• Re-install the cap by turning clockwise.
• Water tank is designed only to suppress airborne
concrete dust, and should only be used with "dry" cutting
diamond blades.
DO NOT use conventional (wet) diamond blades with
water tank as water source. Water flow is not suffi-
cient to properly cool blade!
Fill Water Tank Only With Water!
Never fill Water Tank (P) with flammable liquids or
gasoline, else injury or death could occur!
WARNING!

ASSEMBLY