Parts Identification (What Is What) - Husqvarna FS 513 Operator's Manual

QQ. Travel Speed Lever: Controls ground travel speed
and direction of machine (forward or reverse). Move
lever forward to travel forward. Move lever rearward to
travel backward. Lever MUST be near "STOP" position
before moving Transmission Engagement Lever (PP) into
"Engaged" position.
RR. Starting Battery (FS 520, FS 524 Only): Located
behind lower access panel at the rear of machine. See
"Battery Maintenance" section of this document for in-
structions on charging and maintenance.
SS. Fuel Shut-Off Valve: Used to shut off fuel supply to
engine.
FS 520 / FS 524: Located behind lower access
door at rear of machine. Turn counter-clockwise to
close.
FS 513: Located on engine (see engine operation
manual for more information).
TT. Hydrostatic Transmission: Controls travel speed
and direction of machine. Maintenance free for the life of
the machine.


PARTS IDENTIFICATION (WHAT IS WHAT)

UU. Transmission Drive Tensioner Belt: Connects
Engine to Transmission Drive Belt Tensioner (VV). Check
periodically for wear on belt and sheaves.
V V. Transmission Drive Tensioner: Used to tension
Transmission Drive Belt (UU). See maintenance section
of this document for more information.
WW. Hydrostatic Transmission Belt: Drives Hydrostatic
Transmission (TT). Connects Transmission Drive Belt
Tensioner (VV) to Hydrostatic Transmission (TT). See
maintenance section of this document for more informa-
tion.
XX. Lower Access Panel: Open panel to expose Starting
Battery (RR) and Fuel Shut-Off Valve (SS).
YY. Bladeshaft Drive Belt: Connects Engine and Blade-
shaft. See maintenance section of this document for
more information.
ZZ. Hydrostatic Transmission Belt Tensioner: Spring
loaded idler used to tension Hydrostatic Transmission
Belt (WW). See maintenance section of this document for
more information.
AAA. --
BBB. --