Husqvarna FS 513 Operator's Manual page 5

Blade Water Safety Switch
Engine Coolant Temperature
Keep Work Area Clean/Well Lit, Remove All
Safety Hazards
Dangerously High Noise Level
Pay Extreme Attention to The Care And
Protection Of The Machine Before Starting Up
Remove Tools From Area and Machine
Engine Oil Pressure
Oil Required
Dipstick, Maintain Proper Oil Level
Lubrication Point
High Speed
Low Speed
Electrical Switch-Off
Electrical Switch-On
SYMBOLS and DECALS
Electrical Switch-Start
Repairs Are To Be Done By An Authorized
Dealer Only
Headlight
Diamond Blade
Blade Diameter
Blade Engagement
Pulley diameter
Number of Revolutions Per Minute, Rota-
tional Speed
Blade Flange Diameter
Blade Depth Stop
Cutting Depth Indicator – Depth of Cut
Parking Brake
Parking Brake Applied
Parking Brake Released