Programming Cooking; Practical Cooking Advice - Hotpoint OSX 896D PX Operating Instructions Manual

Programming cooking

GB
! A cooking mode must be selected before
programming can take place. Cooking can also be
programmed for the various cavities.
Programming the cooking duration
1. Press the button until the
numerical digits on the display begin to flash.
2. Turn the TIMER knob towards "+" and "-" to
adjust the time as desired; keep the knob in position
to scroll through the numbers more quickly and
make the setting process easier.
3. Once you have reached the desired duration,
press the button again. The display will show
the duration and set temperature alternately.
4. Press the
5. When cooking has finished, "END" appears on the
display and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1
hour and 15 minutes is programmed. The
programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
! For the delayed programming to work properly, the
clock should be set to the correct time.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Press the button twice: the
numerical digits on the display will begin to flash.
3. Turn the TIMER knob towards "+" and "-" to
adjust the cooking end time value.
4. Once you have reached the desired end time,
press the button again. The display will show
the duration, the cooking end time and the set
temperature alternately.
5. Press the
mode.
Programming has been set when the
buttons are illuminated. The DISPLAY shows the
cooking end time and the cooking duration
alternately.
6. Once cooking has finished, "END" appears on the
display and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed, while the end
time is set to 12:30. The programme will start
automatically at 11:15 a.m.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
12
icon and the
button to begin cooking.
icon and the
button to activate the programmed
and
To cancel programming press the

Practical cooking advice

MULTILEVEL
• Use positions 1, 3, 5 and 6.
• Place the dripping pan at the bottom and the rack
at the top.
• When cooking pizzas or focaccia breads, use a
lightweight aluminium tray with a maximum
diameter of 30 cm, placing it on top of the rack
supplied. If the pizza has a lot of toppings, we
recommend adding the mozzarella cheese to the
top of the pizza halfway through the cooking
process. During the cooking process, it is
advisable to change the order of the shelves.
• Use positions 2 and 4, placing the food which
requires more heat on 2.
• Place the dripping pan on the bottom and the rack
on top.
GRILL
• Preheat the oven for 5 minutes.
• Fit the DIVIDER to the DIVIDER rack "D".
• Keep the oven door closed when cooking in this
mode.
• Place the rack in position 7. Position the food in
the centre of the rack. Position the dripping pan
on shelf level 6.
• This function is recommended for: browning food,
cooking gratins, colouring meringues, making
toasted sandwiches and grilling small quantities
of thin, lean meat.
• We recommend that the power level is set to
maximum. The top heating element is regulated
by a thermostat and may not always operate
constantly.
• Place the grill rack in position 3 or 4 and place
the food in the centre of the rack.
• We recommend that the temperature is set to its
maximum level. The top heating element is
regulated by a thermostat and may not always
operate constantly.
FAST COOKING
• Use the dripping pan on shelf level 6.
• When cooking frozen foods, always follow the
instructions on the packaging.
button.