Hotpoint OSX 896D PX Operating Instructions Manual page 19

2. Turn the TIMER knob towards "+" and "-" to
adjust the cleaning end time value.
3. Once you have reached the desired end time,
press the button again. The display will show
the duration, the cleaning end time and the set
cleaning level alternately.
4. Press the button to activate the programmed
mode.
Programming has been set when the
buttons are illuminated.
5. Once cleaning has finished, "END" appears on
the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy
(ECO) FAST CLEAN level has been selected, with
the default duration of 1 hour. 12:30 is scheduled
as the end time. The programme will start
automatically at 11:30 a.m.
To cancel programming press the
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to
wait for the icon to switch off: this indicates the
oven temperature has dropped to an acceptable
level. You will notice some white dust deposits on
the bottom and the sides of your oven; remove
these deposits with a damp sponge once the oven
has cooled down completely. Alternatively, you can
make use of the already heated oven, in which case
it is not necessary to remove the deposits, they are
completely harmless and will not affect your food in
any way.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
and
button.
GB
19