Glossy Photo Paper - Canon Pixma iP90 User Manual

Glossy Photo Paper GP- 401
This paper is thicker than High Resolution Paper and has a glossy printing surface to produce printouts close to
photograph quality. This media is available in A4/Letter, 4" x 6" / 101.6 x 152.4 mm and Credit Card sizes.
Loading
Load the paper with the whiter side facing up.
A maximum of 10 sheets can be loaded at once.
Be sure to set the paper to portrait regardless of the direction to print.
To prevent sheets from sticking to each other in the time of using A4/Letter paper, separate them from
each other before loading them in the Auto Sheet Feeder. Load the necessary number of paper (a maximum
of 10 sheets) in the Auto Sheet Feeder one at a time.
Set the Paper Thickness Lever (gray) to the right.
Printer Driver Settings
Media Type: Glossy Photo Paper
Page Size: Ensure that the setting matches the size set in the application.
Handling of Printed Output
Remove each sheet as soon as it is printed.
Do not touch the printed surface nor stack the printed sheets until the ink is fixed (approx. two minutes).
Printing Area
See Printing Area
Note When you use Borderless Printing, create the data by using the same size as the paper size, and paste
the data so that it fills the editing screen without leaving any margins. If you are using an application
that allows you to set margins, set the left, right, top and bottom margins to 0 mm or 0 inches. For
instructions on setting margins, refer to the user's manual for your application.