Printer Driver Settings - Canon Pixma iP90 User Manual

Photo Paper Plus Double Sided PP-101D
This paper is provided with glossy coating on both sides, ensuring superior color reproduction.
This paper is suitable for borderless printing.
See Printing Photographs
Important When using Photo Paper Plus Double Sided paper, be sure to clean the inside of the printer before
printing.
If the inside of the printer is dirty, printed paper may be smudged.
See Cleaning the Inside of the Printer
This media is available in A4 / Letter and 5" x 7" / 127.0 x 177.8 mm sizes.
Loading
Load only one sheet at a time.
Set the Paper Thickness Lever (gray) to the right.
If paper is curled, uncurl it before loading in the Auto Sheet Feeder.
Clean the space by the side of Paper Output Slot Cover, so that neither garbage nor dirt adheres to paper.
Note To Print with Duplex Printing (In Windows)
After printing one side, load the paper in the Auto Sheet Feeder to print on the other side, according to
the message shown on the screen.

Printer Driver Settings

Media Type: Photo Paper Plus Double Sided
Page Size: Ensure that the setting matches the size set in the application.
Handling of Printed Output
Remove each sheet as soon as it is printed.
After printing, dry the printouts for more than 30 minutes. When printouts need to be stacked up, allow
them to dry for about 48 hours with a plain paper in the package of the media inserted between the adjacent
printouts after allowing each printout to dry for about 30 minutes.
Avoid drying printouts with a hair dryer or by exposing them to direct sunlight.
Do not touch the surfaces of printouts or stack them up before ink dries up.
Storing Printed Output
Store printouts in album or plastic files to protect them from direct exposure to air.
* Album or plastic files protect printouts from color fading.
Avoid storing printouts in a hot or humid location or in direct sunlight. Store them in a normal operating
environment.
Avoid displaying or exhibiting printouts outdoors or in direct sunlight.