Aligning the Print Head
If ruled lines are displaced or a print result is unsatisfactory, Print Head Alignment is required.
1
With the printer on, load a sheet of A4 or Letter-sized plain paper in the Auto Sheet
Feeder.
Move the Paper Thickness Lever (gray) to the right position.
2
Open the Printer Properties dialog box.
See
Opening the Printer Properties Dialog Box Directly from the Start Menu
3
Print the pattern.
(1)
Click the Maintenance tab.
(2)
Click Print Head Alignment.
(3)
Click Print Head Alignment.
Note
Click Check Setting to print the current setting and finish the operation.
(4)
When the confirmation message is displayed, click OK.
(5)
After the pattern is printed, click Yes.
4
Align the Print Head.
(1)
Look at the printout. From the patterns, select the most even, least irregular patterns.
(2)
Enter the numbers.