Canon Pixma iP90 User Manual page 27

sections that extend beyond the paper are not printed because the
image is enlarged to a size slightly larger than the paper size. You can
use a slide bar to adjust how much the image extends beyond the
paper. Usually, you need not to adjust this setting. If you move the
slide bar to the left to reduce the extension amount, a border may
appear.
(4) Printing Type
Select a printing method from the following.
Normal-size Printing: The document is printed according to the
original dimensions. This setting is usually selected by default at
factory.
Fit-to-Page Printing: The document is automatically resized and
printed to fit into a specified page size.
Scaled Printing: The document is resized when printed. When this is
selected, you can specify Printer Paper Size and Scaling.
Page Layout Printing: Pages are reduced and printed so that multiple
document pages fit on each printed page.
Poster Printing: This enlarges and splits the print image across several
sheets of paper. The printed sheets can then be assembled to make a
large poster.
Booklet Printing: A multiple-page document is printed so that four
pages of the document fit on each printed page. The print order is set
automatically. After the document is printed, you can create a booklet
by folding and saddle-stitching the document.
(5) Duplex Printing
The document is printed on both sides of the paper. After printing one
side, turn the ejected page over, and print on the other side.
(6) Staple Side
Select a staple side for binding.
(7) Specify Margin
Specify the staple margin.
(8) Reverse Order