SuperIO Configuration
Advanced
Configure ITE8718 Super IO Chipset
Serial Port1 Address
Serial Port2 Address
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
Restore on AC Power Loss by IO[Power Off]
Watch Dog Degree
Watch Dog Timer
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Serial Port1 Address
Select an address and corresponding interrupt for Serial Port 1.
Options: 3F8/IRQ4 (Default) / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Serial Port2 Address
Select an address and corresponding interrupt for Serial Port 2.
Options: 2F8/IRQ3 (Default) / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Parallel Port Address
This item allows you to determine access onboard parallel port controller with
which I/O Address.
Options: 378 (Default) / 278 / 3BC / Disabled
Parallel Port Mode
This item allows you to determine how the parallel port should function.
Options: Normal (Default)
EPP
ECP
ECP+EPP
BIOS SETUP UTILITY
[3F8/IRQ4]
[2F8/IRQ3]
[378]
[Normal]
[IRQ7]
[Second]
[00000]
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
BI94GS-IA
Allows BIOS to Enable
or Disable Floppy
Controller
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
31