Asus NCCH-DL User Manual page 49

Hide thumbs Also See for NCCH-DL:

Table of Contents

5. IEEE 1394 connector (10-1 pin IE1394_1)

This connector is for a 1394 module. Attach the 10-1 pin 1394 cable

plug from the module to this connector. You may also connect a 1394-

compliant internal hard disk to this connector.

NCCH-DL IEEE-1394 connector

6. Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature.

This requires an external detection mechanism such as a chassis

intrusion sensor or microswitch. When you remove any chassis

component, the sensor triggers and sends a high-level signal to this

lead to record a chassis intrusion event.

By default, the pins labeled "Chassis Signal" and "Ground" are shorted

with a jumper cap. If you wish to use the chassis intrusion detection

feature, remove the jumper cap from the pins.

NCCH-DL Chassis intrusion connector

ASUS NCCH-DL motherboard

IE1394_1

CHASSIS1

(Default)

2-29

Table of Contents