Security - Asus NCCH-DL User Manual

Boot Up NumLock Status [On]
Allows you to select the power-on state for the NumLock. Configuration
options: [On] [Off]
Typematic Rate Setting [Disabled]
Allows you to enable or disable the keyboard typematic rate setting. Set to
[Enabled] to configure the Type Rate and Type Delay items. Configuration
options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay
become configurable only when the item Typematic Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which character repeats when you hold a
key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before key strokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
Full Screen Logo Show [Enabled]
Allows you to enable or disable the ASUS Mylogo2™ feature.
Configuration options: [Disabled] [Enabled]
The ASUS MyLogo2 is automatically installed when you install ASUS
Update from the support CD. You need to launch ASUS Update, then
ASUS MyLogo2 to change the full screen logo.

4.6.5 Security

Supervisor Password
User Password
Password Check
ASUS NCCH-DL motherboard
Security
Clear
Clear
[Setup]
Select Menu
Item Specific Help
Supervisor password
control full access.
4-39