Selecting An Emulation - Fujitsu PrintPartner 16V User Manual

Selecting an
Emulation
User' s Manual
The PrintPartner 16ADV has two emulations (PCL and FPS) as a
standard feature, but the PrintPartner 16DV has PCL as standard
and FPS as optional. You can use these emulations to connect your
printer to different computers. PCL emulates HP LaserJet 5 printers
and FPS emulates PostScript Level 2 compatible printers by the
PowerPage© Level 2 interpreter.
When the printer has both emulations, it automatically selects the
active emulation with default settings. To specify an emulation,
select the emulation using the control panel. Use the Personality
menu of the Config menu as shown below.
POWER ONLINE DATA
POWER DATA
ONLINE
The selected emulation is selected (an asterisk is followed). Once you
change the emulation, the other menus automatically change to
reflect the options and functions of the new emulation. For details of
the setup menu, see Chapter 2.

Selecting an Emulation

1. Enter setup mode. Press the
printer offline (the
ONLINE indicator turns
off). Then, press the
button briefly six times.
The message display
indicates
CONFIG MENU.
2. Select the Personality
menu. Press the
ERROR
button briefly. The message
display indicates
PERSONALITY AUTO*.
3. Select emulation. Press the
ERROR
AUTO
option
PCL, PS,
AUTO.
button when the desired
option is displayed.
button to put the
SETUP MENU
button briefly. The
changes to
then back to
Press the
1-21