Table of Contents
Advertisement
User' s Manual
Notice:
Put the paper stack in the paper tray with the printing side faced down.
If paper is curled, remove the curl.
5. Prepare a paper stack.
Prepare paper of the size
indicated by the size label
(*). Fan the paper stack
both ways to prevent sheets
from sticking together.
6.
Load the paper. Place the
front portion of the paper
stack on the tray and slide it
backwards so that the stack
is placed under the two
stoppers. Gather the edges
of the stack together to
ensure correct positioning
of paper in the tray.
Make sure the stack does
not exceed the limit mark.
7.
Adjust the side guides.
Push the outer PUSH mark
of either side guide to the
width of paper. Align the
rear edges of the paper
stack.
Bad placement
Good placement
Setting Up
1-11
Advertisement
Table of Contents
