Table of Contents
Advertisement
Setting Up
1- 8
To prepare the print unit and install the toner bottle, follow these
steps:
Projecting guide
Open the upper door. Lift
1.
the milled portions at the
Front left and right of the
upper door to open it.
Remove the protective
2.
materials from the print
unit. Remove protective
sheet 1 Pull clear tape 2
until its blue end is visible
and remove it. Remove two
restraint cushions 3
Remove the toner bottle
3.
from its bag.
Shake the toner bottle by
4.
moving it back and forth
in a horizontal motion
several times.
Remove the plastic seal
5.
from the toner bottle.
Gently pull off the seal
being careful not to spill
toner. Handle to seal
carefully to avoid staining
your hands or clothes.
User' s Manual
Advertisement
Table of Contents
