Removing The Shelf Holders; Installation Of The Carbon Air Filter; Door Reversibility - AEG S75358KG38 User Manual

18
Installation

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Installation of the carbon air filter

The carbon air filter is an active carbon filter which absorbs bad odours and permits to
maintain the best flavour and aroma for all foodstuffs without risk of odour cross contami-
nation.
On delivery the carbon filter is in a plastic bag to
maintain it's duration and characteristics. The fil-
ter should be placed behind the flap before the
appliance is turned on.
1. Open the flap cover (1)
2. Remove the filter from the plastic bag
3. Insert the filter in the slot found in the back
of the flap cover (2)
4. Close the flap cover
During operation, always keep the air ventilation
flap closed.
The filter should be handled carefully so frag-
ments do not loosen from the surface.

Door reversibility

WARNING!
Before carrying out any operations, remove the plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
A
B
C
2
1