Removing The Shelf Holders; Electrical Connection - AEG SANTO K 9 12 00-7i User Manual

Climate class
N
ST
T

Removing the shelf holders

Your appliance is equipped with shelf retainers that make it possible to secure the shelves
during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for
this purpose. If the domestic power supply socket is not earthed, connect the appliance to
a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Directives.
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
A
27
Installation
B
C