Using Microphone(S); Treble And Bass Controls; Talkover - Radio Shack 3200026 User Manual

Using Microphone(s)

To mix the microphone connected to the MIC 1 or MIC 2 jack with other audio
input sources, rotate MIC 1 or MIC 2 to increase or decrease the microphone
volume. Set MIC 1 or MIC 2 to 0 when you are not using the microphone.

TREBLE and BASS Controls

Your mixer has a set of TREBLE and BASS controls to tailor the frequency
sounds for each microphone.
1. For regular sound, leave MIC TREBLE and MIC BASS set to 0.
2. Rotate MIC TREBLE toward +12 to increase high frequency sounds, or toward
-12 to decrease high frequency sounds.
3. Rotate MIC BASS toward +12 to increase low frequency sounds, or toward -12
to decrease low frequency sounds.

TALKOVER

ON/OFF
TREBLE
BASS
TALKOVER
When you are not using your microphone, set TALKOVER/ON/OFF to OFF.
The microphone's input is turned off and all other audio input sources are
unaffected.
1. To use your microphone, set TALKOVER/ON/OFF to ON. The microphone
sound is mixed equally with the other audio input sources.
2. Set TALKOVER/ON/OFF to TALKOVER so the microphone's sound is louder
than the other audio input sources.
18