Radio Shack 3-Channel Stereo Sound Mixer Quick Start Manual

3-Channel Stereo Sound Mixer
Quick Start Guide
Your 3-Channel Stereo Sound Mixer is perfect
for mixing sound from multiple audio sources,
such as microphones, tuners, CD players, or
turntables. You can adjust each audio source's
sound level for the best mix to play through
your sound system, or for recording. This
mixer is ruggedly constructed for home or
professional use.
TALK OVER ON/OFF —
you can talk over it using the microphone.
connect a low impedance microphone
MIC —
with an XLR plug here.
adjust the microphone's treble.
MIC TREBLE —
adjust the microphone's bass.
MIC BASS —
select an input source
ASSIGN A/ASSIGN B —
(channel) for A and B when using cross
fader. Turn to to disable the cross fader.
OFF
Please read this quick start before
installing, setting up and using your new product
www.radioshack.com
32-2057
lower audio input volume, so
— mix sound output between two sources (A and B). To
CROSS FADER
equally mix two sources, slide this control to the middle (5).
DJ MIC, CH1, CH2, CH3, MASTER
illuminated controls help you to see in low light conditions.
LEFT CHANNEL/RIGHT CHANNEL —
to your preference by cutting or boosting
the frequency by ±12dB.
select a channel to monitor and prepare
CUE —
for mixing when wearing headphones.
— set to
PHONO 1/LINE 1, PHONO 2/LINE 2, LINE 3/LINE 4
the desired input sources to play.
CUE/PGM
prepared for mixing when wearing headphones.
— adjust the volume of the selected input. The
tailor sound output
MONO/STEREO
stereo or monaural.
12V/3W MAX LAMP
light up the mixer's controls.
POWER
EQ —
CUE LEVEL
volume.
PHONES
headphones with a
balance output play volume with the input being
—
— set the sound output to
connect a lamp to
—
turn the mixer on and off.
—
turn the equalizer on and off.
adjust the headphone's
—
connect a pair of stereo
—
/ -inch plug.
1
4