Radio Shack 32-1218 Owner's Manual
  1. Manuals
  2. Brands
  3. Radio Shack Manuals
  4. Music Mixer
  5. 32-1218
  6. Owner's manual

Radio Shack 32-1218 Owner's Manual

4-channel stereo mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
Please read before using this equipment.

Advertisement

Table of Contents
loading

Related Manuals for Radio Shack 32-1218

Summary of Contents for Radio Shack 32-1218

  • Page 1 Owner’s Manual Please read before using this equipment.
  • Page 2 Features Your RadioShack 4-Channel Stereo Mixer is CUE LEVEL Control — lets you adjust the a sophisticated desktop control center, per- headphone's volume level. fect for mixing sound on four separate chan- MASTER Volume Control — lets you con- nels from multiple audio sources such as trol the mixer's overall volume level.

  • Page 3: Presetting The Controls

    Preparation PRESETTING THE nect to the mixer, be sure to have their power controls set to off, and any tone controls set CONTROLS to flat (zero). WARNING: To reduce the risk of fire or CONNECTING THE shock hazard, do not expose this product to rain OUTPUTS or moisture.

  • Page 4: Connecting Headphones

    CONNECTING jacks (matching PHONO 2 L R INPUT left to left, and right to right). HEADPHONES Note: If you connect magnetic-cartridge To listen in privacy or monitor the audio turntables, also connect their ground source inputs so you can locate an exact wires (usually black or green ) to passage or section before mixing it, plug a pair of stereo headphones (not supplied) with...

  • Page 5: Presetting The Input Signal Levels

    Operation 1. Set the volume levels on the output the best results, each input signal level devices (amplifier/receiver and tape should normally be set so the output level deck) to minimum and turn them on. meters never moves over into the red range (above 0 dB).

  • Page 6: Checking The Sound

    • Do not play a quiet portion of music you get the reading of 0 dB on the out- while you adjust the volume levels, oth- put meters. erwise the volume levels for channels 1, 8. Stop playback of the input source of 2, 3, and 4 will be overdriven during the AUX 1 or AUX 2.

  • Page 7: Mixing The Inputs

    MIXING THE INPUTS es the volume level of the source currently playing. You can connect input signals from up to six 1. Plug headphones into and then PHONES audio sources, select any two, then mix the place them on your head. two selected inputs so only one or both play through your sound system.

  • Page 8: Setting The Sound Balance

    SETTING THE SOUND • To the left to fade in the channel selected by and fade out ASSIGN A BALANCE the channel selected by ASSIGN B lets you adjust the sound balance BALANCE • To the right to fade in the channel between the left and right speakers.

  • Page 9: Troubleshooting

    Troubleshooting With proper care and handling, your mixer should give you years of trouble-free service. How- ever, if your mixer is not working properly, follow these suggestions to see if you can eliminate the problem. If you cannot, take the mixer to your local RadioShack store for assistance. Problem Possible Solution Nothing works.

  • Page 10: Specifications

    Specifications Input Sensitivity/Impedance MIC 1 (DJ MIC) .................. 1.5 mV, 600 ohms, Unbalanced MIC 2 ....................1.5 mV, 600 ohms, Unbalanced PHONO 1, PHONO 2 ....................3 mV/50 kohms LINE 1, LINE 2, AUX 1, AUX 2 ................150 mV/27 kohms Output Level Main Out.........................
  • Page 11 Notes Notes...
  • Page 12 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 We Service What We Sell 12/99 32-1218 RadioShack Corporation 04A01 Printed in China Fort Worth, Texas 76102...

Table of Contents