Mac Addresses Table; Aging Time Configuration - Planet GSW-1602SF User Manual

4.12 MAC Addresses Table

4.12.1 Aging Time Configuration

This function provides MAC Address Table refresh aging time setting, the screen in
Ageing Timeout Configuration (seconds)
The MAC Address database contains static entries, which are never aged out, and dynamically learned entries, which
are removed if they are not updated within a given time. You specify that time by entering a value for the Address
Ageing Timeout. You may enter any number of seconds between 0 and 65535.
IEEE 802.1D recommends a default of 300 seconds, which is the factory default.
The Aging Time Configuration includes the following fields: Table 4-32 Description of the Aging Time Configuration.
Item Description
Allow assign an aging time for MAC Address table refresh of Web Smart Gigabit Switch, the
Aging Time
available range is 0-65535 seconds. Default mode is 300 seconds.
(Seconds)
Button
Press this button for save current configuration of Web Smart Gigabit Switch.
Apply
Figure 4-80 Aging Time Configuration
Table 4-32 Description of the Aging Time Configuration
-111-
User's Manual of GSW-1602SF / GSW-2404SF
Figure 4-80 appears.