HP t5520 Administrator's Manual page 65

Administrator's Guide
To configure SNMP:
1. On the Agent tab, type the physical location of the terminal in the
Location box.
2. Type the name of the contact person responsible for the terminal
in the Contact box.
3. Assign the terminal to a community by selecting a community
from the Community Name list.
4. To add a trap destination:
a. In the Trap Destinations section, click Add. The SNMP
Configuration dialog is displayed.
b. Type the host name or IP address of the NMS trap server, and
then click OK.
www.hp.com
Control Panel
4-31