HP t5520 Administrator's Manual page 29

✎
✎
Administrator's Guide
3. Select the primary connection in the user's connection list that
you want to automatically connect.
4. In the Auto column, if the entry for the selected connection is No,
click on No to change it to Yes.
5. Select the connection in the user's connection list that you want
to make automatically reconnect.
You can set only primary connections to automatically reconnect.
6. In the Persistent column, if the entry for the selected connection
is No, click on No to change it to Yes.
7. To arrange the order of connections, select a connection and click
the up and down arrows. Secondary connections are associated
with the first primary connection above them in the list.
8. Click Apply to save your changes.
You can set only primary connections to automatically connect when
HP Connection Administrator is launched.
www.hp.com
HP Connection Administrator
3-15