HP t5520 Administrator's Manual page 64

Control Panel
4-30
To add and assign rights to an accepted community:
1. Click the Security tab.
2. Click Add in the Accepted Community Names section. The
Community Configuration dialog is displayed.
3. Type the name of the community in the Community Name box.
4. Select the rights to the community in the Rights list, and then
click OK.
To add SNMP packets:
1. Click the Security tab.
2. Select Accept SNMP Packets from these hosts.
3. Click Add in the SNMP packets section. The SNMP
Configuration dialog displays.
4. Type the host name or IP address, and then click OK.
5. Repeat steps 1 and 2 to add more hosts.
www.hp.com Administrator's Guide