HP t5520 Administrator's Manual page 26

HP Connection Administrator
3-12
■
Delete: Select a connection in the Available connections list,
and then click this button to delete the connection. Deleting a
connection here also deletes the connection from the list of
connections assigned to all users.
■
Edit: Select a connection in the Available connections list, and
then click this button to edit the connection.
■
Connections for [user]: On the right side of the window, this
panel displays the connections assigned to the user displayed in
the User box.
❏
Name: Displays the name of the connection assigned to the
user.
❏
Type: Displays the type of connection.
❏
Primary: Designates a connection as either primary or
secondary. Yes indicates a primary connection. Click on the
column value to change the setting. You cannot change the
first connection in the list to secondary.
❏
Auto: Determines whether the system automatically connects
when HP Connection Administrator starts up. Yes indicates
the system will automatically connect. Click on the column
value to change the setting. NOTE: You must configure HP
Connection Administrator to auto start for this setting to
function properly. To configure Connection Administrator to
automatically start up, see
Administrator".
❏
Persistent: Determines whether the system will attempt to
reconnect when a connection fails. Yes indicates the system
will automatically attempt to reconnect. Click on the column
value to change the setting.
■
OK: Click to save changes and exit the Advanced window.
■
Cancel: Click to cancel unsaved changes and exit the Advanced
window.
■
Apply: Click to save changes.
www.hp.com
"Auto starting Connection
Administrator's Guide