Display Assembly - HP PAVILION DX6500 Maintenance And Service Manual

Display assembly

Description
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with a
camera and microphones (includes camera, microphones, and WLAN transceivers and antenna
cables)
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with
microphones (includes microphones and WLAN transceivers and antenna cables)
Before removing the display assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory/WLAN module compartment cover (see
5.
Disconnect the wireless antenna cables from the WLAN module (see
6.
Remove the keyboard (see
7.
Remove the switch cover (see
8.
Remove the display assembly:
Close the computer and turn it upside down, with the rear panel toward you.
1.
Remove the Phillips PM2.5×8.0 screws that secure the display assembly to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the computer to an upright position.
4.
Battery on page 36).
Keyboard on page 53).
Switch cover on page
Memory module on page
WLAN module on page
49).
Component replacement procedures
Spare part number
446481-001
446482-001
43).
46).
55