Tools Required And Preliminary Procedures; Tools Required For Installation; Preliminary Procedures - HP Model 743 PC Owner's Manual

Tools Required and Preliminary Procedures

Tools Required for Installation

All field replaceable parts can be accessed with these tools:
Grounding wrist strap
No. 1 Pozidrive screwdriver
Small flat-tipped screwdriver
3
5mm ( / -inch) nutdriver.
16

Preliminary Procedures

Perform the following steps before installing or removing accessories.
1 Exit application programs.
2 Shut down the operating system and power off the VME card cage (see
for details).
3 Remove all cables connected to the board computer.
4 Set up a static-free place on which to work.
Tools Required and Preliminary Procedures
Accessories Installation
2-3